 (1)/assets/images/icons/cart-icon.png){kind=icon}
CONTENT:
Epoxy resin 150ml (100ml+50ml)
Hexcel fiberglass
Microballoons 10g
2 Mixin cups
4 measuring cups
Wooden putty
4 Mixing sticks
1 pair gloves
Scissors
8 foils sandpaper (4 kinds)
Adhesive foil
Repair instructions (German/English/French/Spanish/Portuguese)
BIG DING Sticker
2 Guides:
Nose Ding: https://surfersmag.de/articles/ding-repair-nose-ding.html
Delamination: https://surfersmag.de/articles/ding-repair-delamination.html??????? SURFBOARD REPAIR KIT
Epoxy or Polyester ?
EPOXY: FITS ALL SURFBOARDS | POLYESTER: USE ONLY FOR POLYESTER SURFBOARDS !!
Which surfboard repair kit you should choose depends on the blank material your surfboard is based on. Most boards are based on Polyurethan (PU) and are laminated with polyester resin. For PU boards use our red polyester surfboard repair kit, however you can also use the blue epoxy repair kit. If you have an epoxy board based on expanded Polystyren (EPS) or extruded Polystyren (IX-PS, XPS), use the blue Epoxy surfboard repair kit. Polyester might eat a hole in your Polystyren blank!
For WAVE-, WIND-, KITE-, and SUP Surfboards
INSTRUCTIONS
Mix A (Polyester)
For a half filled cup of resin give about 10 drops hardener and stirr well.
Mix A (Epoxy)
Mix the Hardener and the Resin in ratio 1:2 using the Measurmentlines of the mixing cup.
Mix B
Use mixture_A and add microballons until the mix is viscous.
Dry
Dry the board and allow any absorbed water to evaporate.
Clean
Cut away any loose bits of fiberglass. If the fiberglass is cracked but in place, do not remove it. Sand 3 cm around the ding using the rough sanding paper.
Mask and fill
Fix a piece of foil with the tape to create a sidewall and fill it slowly with your prepared mixture_B.
Dry and sand
Let it dry.
Remove the tape and try to rebuilt the
old shape by sanding with rough paper.
Glass
Cut a piece of glass and fix it with tape 2 cm around the ding.
Spread mixture_A using a piece of carton and squeeze a little. Use 2 layers of glass.
Top coat
Dry untill it`s sticky and remove the tape. Spread mixture_A
1 cm overlapping the glass structure.
Sand
Let it dry well.
Sand the ding using the range of sanding paper. To optimize the result, spread mixture_A again and sand well.
Finish
Finish with fine wet sanding paper.
BIG DING !
Har du spørgsmål til denne vare?
Vi svarer så hurtigt vi kan. På alle hverdage 10.00-17.30 kan du forvente svar indenfor 30 min.
Kitesport leverer varer via Post Danmark eller GLS
Såfremt varen er på lager, afsender vi den inden for 24 timer. Er varen på lager, og bestilles der inden kl. 17, afsendes den samme dag.
Er varen ikke på lager, er leveringstiden typisk 5-8 arbejdsdage.
